• Extra large capacity of 59 litres (13 gallons)

• Fits in front of the rear axle of the vehicle

• Allows for the fitting of TWO toroidal tanks, giving a total capacity of 105 litres of LPG

• Does not reduce existing ground clearance of the vehicle

• Made from 3mm thick 'CR4' quality mild steel, "double welded" - both inside and outside

• It has a capacity of approximately 24.4 litres (5.4 gallons)

• Accepts an 80 litre x 360mmØ LPG tank (see note below)

• Made from 3mm thick 'CR4' quality mild steel, "double welded" - both inside and outside

• Fixes to the vehicle using existing tapped holes - NO DRILLING

• Does not reduce existing ground clearance of the vehicle

• A steel underguard, giving extra protection to the petrol and the LPG tank, is included

1. If a tow bar is fitted to the vehicle, (or is required to be fitted in the future), a 315mmØ 60 litre LPG tank is used
2. The LPG tanks used in this Combo MUST be 4-hole tanks

• This is the latest of our heavy duty skidded cradle units

• Enables a total of over 150 litres of fuel to be carried without losing ANY interior space

• Cradle can be used in conjunction with Jeep-approved tow bar

• Special fully skidded cradle for LPG tanks mounts to chassis using existing holes

• Cradle accepts 80 litre x 360mmø + 50 litre x 315mmø LPG tanks - total LPG = 130 litres

• It is a 'high capacity' tank, holding 47 litres (10.3 gallons)

• Unit has full length steel skid and does not compromise ground clearance

Jeep Wrangler

• This tank fits in front of the rear axle of the vehicle

• It has a generous capacity of approximately 37 litres (8.1 gallons)

• Made from 3mm thick 'CR4' quality mild steel

• "Double welded" - both inside and outside

• Allows a 70 litre LPG tank to be fitted (in place of the original petrol tank)

• This tank fits neatly in the OSR corner of the vehicle

• It has a generous capacity of approximately 36 litres (7.9 gallons)

• Made from 3mm thick 'CR4' quality mild steel

• "Double welded" - both inside and outside

• Allows a choice of LPG tanks to be fitted (in place of the original petrol tank)

• This tank fits in front of the rear axle of the vehicle

• It has a generous capacity of approximately 31 litres

• Made from 3mm thick 'CR4' quality mild steel

• "Double welded" - both inside and outside

• Allows a 75 litre LPG tank to be fitted (in place of the original petrol tank)

• This unit enables the maximum LPG capacity (120 litres) to be fitted easily to these vehicles

• Easily achieved without losing ANY interior space

• Cradle can be used in conjunction with approved tow bar

• Bolts to vehicle using original petrol tank mounting points - no drilling

• Cradle accepts 70 litre x 360mmø + 50 litre x 300mmø LPG tanks - total LPG = 120 litres (actual = 96 litres at 80% fill)

• Unit has full length steel skid and does not compromise ground clearance

• Special new petrol tank (29 litres / 6.3 gall.) fits in front of axle, with steel extension pipe to original fuel filler inlet supplied.

• It has a generous capacity of approximately 35.5 litres (7.8 gallons)

• Fits in front of the rear axle

• Leaves space for a 70 litre x 360mmØ LPG tank

• Made from 3mm thick 'CR4' quality mild steel, "double welded" - both inside and outside

• Does not reduce existing ground clearance of the vehicle

• This tank fits forward of the axle on the n/side of the vehicle

• It is a 'high capacity' tank, holding 42 litres (9.2 gallons)

• Made from 3mm thick 'CR4' quality mild steel

• "Double welded" - both inside and outside

• Does not compromise ground clearance

• Allows fitting of a 80 litre x 360mmØ LPG tank

• This is the latest of our 'easy-to-fit' Combo units

• It has a capacity of approximately 26 litres (5.7 gallons)

• Easy to fit using existing tapped holes in chassis -  NO DRILLING

• Can be fitted to vehicles with or without a tow bar

• Accepts a 70 litre x 360mmØ LPG tank (4-hole or single hole)

• Comes complete with all extra tubing and clips required to fit

• A steel underguard, giving extra protection to the petrol and the LPG tanks,  is included

• Does not reduce existing ground clearance of the vehicle

• This tank fits in front of the rear axle of the vehicle

• It has a generous capacity of approximately 46 litres (10.1 gallons)

• Made from 3mm thick 'CR4' quality mild steel

• "Double welded" - both inside and outside

• Allows a 80 litre LPG tank to be fitted (in place of the original petrol tank)